What Is Beef Suet? The Starting Point of Our Tallow Skincare

Cattle from Meunier Livestock, the Alberta farm behind our beef suet

What Is Beef Suet? The Starting Point of Our Tallow Skincare

If you’ve spent any time around tallow skincare, you’ve probably heard the words tallow and suet used almost interchangeably.

They’re not the same thing.

Tallow is the finished rendered fat we use to make our skincare products.

Suet is where it starts.

At Resting Beef Face, every batch of tallow begins with Alberta beef suet. As we’ve grown, we’ve also become more intentional about where that suet comes from and building relationships closer to the source.

Today, our suet comes from the Alberta cattle operation behind 1899 Beef Co. and Modern Pastures.

Before that suet becomes the smooth, creamy tallow that goes into our Face Balms, Body Butters, soaps and other products, however, it looks considerably less glamorous.

It’s raw beef fat.

Skincare has had better marketing moments.

But understanding what beef suet actually is—and where ours comes from—is an important part of understanding the ingredient at the foundation of Resting Beef Face.

What Is Beef Suet?

Beef suet is a firm type of fat found primarily around a cow’s kidneys and loins.

Unlike the softer fat found throughout other parts of the animal, suet is naturally firm and dense. Traditionally, it has been valued for cooking, baking, soapmaking and, of course, rendering into tallow.

When suet arrives at Resting Beef Face, it hasn’t magically become skincare yet.

It needs to be carefully rendered to separate the usable fat from the connective tissue, moisture and other material naturally present in the raw ingredient.

What remains after that process is beef tallow.

So the easiest way to remember the difference is:

Suet = the raw fat.
Tallow = the rendered fat.

Same animal. Different stage of the process.

Is All Beef Fat Suet?

No—and this is where the terminology can get confusing.

Cattle naturally carry fat in different areas of the body, but not all beef fat is suet.

Suet specifically refers to the firm fat concentrated around the kidneys and nearby loin area. Other beef fat and fatty trimmings can also be rendered, but they aren’t technically the same raw material.

That distinction matters to us because we deliberately use beef suet as the starting material for our tallow.

We’re not simply collecting miscellaneous beef fat, melting it down and putting it into a jar.

The raw material matters too.

Why We Start With Beef Suet

When you look at a finished jar of Face Balm, it’s easy to focus on what’s directly in front of you.

But our tallow starts long before anything goes into that amber jar.

It starts with the fat.

At Resting Beef Face, we render our own tallow rather than purchasing finished, pre-rendered tallow from a cosmetic ingredient supplier.

That means we’re involved with our core ingredient before it becomes tallow at all.

We know what we’re starting with.

We know where it’s coming from.

We know how it’s rendered.

We know how it’s filtered.

And we know what happens to it before it reaches one of our formulas.

For a skincare brand built around one very important ingredient, that matters to us.

Where Our Beef Suet Comes From

Cattle from Meunier Livestock, the Alberta farm behind our beef suet
Our beef suet comes from Meunier Livestock, the Alberta cattle operation behind 1899 Beef Co. Photo courtesy of 1899 Beef Co.

This is where the story has become even more interesting.

Our suet now comes from Meunier Livestock, the fourth-generation Alberta cattle operation behind 1899 Beef Co.

The Meunier family’s ranching history dates back to 1899. Today, their cattle operation spans Alberta ranchland and maintains control and traceability throughout the lifecycle of its cattle. Their approach includes practices such as rotational grazing and diverse forage systems, and the operation is Verified Beef Production Plus (VBP+) approved and certified to the Canadian Roundtable for Sustainable Beef’s Sustainable Beef Production Standard.

For us, having a relationship closer to the agricultural source of our suet is important.

Tallow isn’t some mysterious laboratory ingredient.

It came from an animal.

We don’t want to disguise that part of the story—we want to know more about it.

Working with the farm behind our suet gives us a clearer connection between the raw agricultural ingredient we receive and the finished skincare product we eventually make from it.

1899 Beef Co. is the Meunier family’s beef brand, while Modern Pastures provides a way for consumers to purchase that same Alberta beef and learn more about the farms behind their food.

And then there’s us.

They raise the beef. We get excited about the fat. Your face gets involved somewhere down the line.

Everyone has their thing.

From Beef Suet to Tallow

Once the suet reaches us, our part of the process begins.

Turning beef suet into tallow is called rendering.

Using controlled heat, we slowly render the suet to separate the usable fat from the other material naturally present in it.

As the fat melts, it separates from the remaining solids. The liquid fat is then carefully filtered before being allowed to cool and solidify.

The transformation is fairly remarkable.

What begins as raw beef suet becomes clean, pale tallow with a smooth, firm consistency.

That’s the ingredient that eventually makes its way into our skincare.

If you’d like to see that process in more detail, our guide What Is Beef Tallow? follows the transformation from raw suet to the finished ingredient.

Why Do We Render Our Own Tallow?

We could buy tallow already rendered.

It would certainly save some time.

It would also remove us from one of the most important parts of making our products.

Rendering in-house gives us control over how our core ingredient is handled and processed before we formulate with it.

We’re not opening a bucket of finished tallow from a cosmetic ingredient supplier and hoping it meets our expectations.

We start with the suet.

That means the process isn’t particularly glamorous. There are large quantities of raw beef fat, rendering equipment, filtering, cleaning and quite a lot happening before you ever see a tidy amber jar with a Resting Beef Face label on it.

Apparently farm-to-face skincare has a middle part nobody puts on the brochure.

We happen to think that middle part matters.

Using More of What Already Exists

There’s another reason this relationship between beef production and tallow skincare makes sense to us.

We’re not raising cattle to make moisturizer.

The cattle are already being raised for beef. Suet is one part of that animal, and by taking that fat and carefully rendering it into tallow, we’re able to give an existing animal-derived resource another purpose.

It’s one of the things we’ve always appreciated about tallow.

Instead of distancing ourselves from where the ingredient comes from, we’d rather understand the entire chain.

In our case, that chain now looks something like:

Alberta ranch → beef → suet → Resting Beef Face → rendered tallow → skincare.

The beef itself can make its way to Canadian tables through 1899 Beef and Modern Pastures.

We get the suet.

And we’re perfectly happy with our end of that deal.

Suet Isn’t Skincare—Yet

This is probably the most important distinction to make.

Raw beef suet isn’t the ingredient we’re rubbing on your face.

It’s the raw material used to make the tallow that goes into our skincare.

Rendering transforms that raw fat into a usable cosmetic ingredient by separating the fat from moisture, tissue and other remaining material.

Only after the rendering and filtering process is complete do we have the tallow we use as the foundation of our formulas.

That’s why saying suet and tallow mean the same thing skips an important part of the process.

One is where we begin.

The other is what we make from it.

What Happens to the Tallow Next?

Resting Beef Face Body Butter made with rendered Alberta beef tallow
From rendered beef tallow to finished skincare—our tallow is formulated by hand into small-batch Resting Beef Face products.

Once our tallow has been rendered, filtered and cooled, it becomes the foundation for much of what we make at Resting Beef Face.

From there, formulation matters.

Depending on the product, we combine our tallow with other carefully selected natural ingredients to achieve the texture, consistency and purpose we’re looking for.

We don’t use synthetic ingredients in our formulations, but that doesn’t mean we’re simply throwing a handful of natural ingredients together and hoping for the best.

Every ingredient needs a reason to be there.

Our Face Balm is a good example. We pair our rendered tallow with castor oil because the castor oil helps us create the smooth, spreadable consistency we wanted from a daily facial balm.

You can read more about that decision in Why We Use Castor Oil in Our Face Balm.

The progression looks something like this:

Beef suet → rendered tallow → intentional formulation → finished skincare.

Simple on paper.

Slightly messier in real life.

From an Alberta Farm to Your Skincare

One of the reasons we’re creating our Understanding Tallow series is because we think people should know where their skincare ingredients actually come from.

With tallow, we’re not interested in hiding its origin behind prettier terminology.

It starts with beef fat.

More specifically, ours starts with Alberta beef suet from Meunier Livestock—the farm behind 1899 Beef Co. and the same beef available to consumers through Modern Pastures.

Then it comes to us.

We render it ourselves. We filter it carefully. And we turn the resulting tallow into the foundation for much of what we make.

There isn’t anything especially mysterious about the process.

There is, however, quite a lot of care between raw beef fat and finished Face Balm.

And we think that part of the story is worth showing too.

Suet is where our tallow starts. Tallow is where our skincare starts.

If you want to follow the next step, read What Is Beef Tallow? to see how we turn beef suet into the ingredient behind Resting Beef Face.

And if you’re curious about the Alberta beef behind our suet, visit 1899 Beef Co. or Modern Pastures to learn more about the farm and where their beef comes from.

Why We Use Castor Oil in Our Face Balm

Resting Beef Face Unscented Tallow Face Balm displayed with rendered beef tallow and golden castor oil on a rustic wood surface with natural linen and soft light.

Why We Use Castor Oil in Our Face Balm

When we created our Face Balm, our goal wasn’t to make a product with the longest ingredient list or the trendiest oils. We wanted to make something simple—something where every ingredient had a clear purpose.

Today, many skincare products contain dozens of ingredients. Some are included to stabilize water-based formulas, improve texture, extend shelf life, or create a particular sensory experience. Those ingredients all have their place, but we chose a different approach.

Our Face Balm is made with just two core ingredients: grass-fed beef tallow and castor oil. Our Lavender Face Balm uses that same foundation with the addition of a small amount of lavender essential oil for those who enjoy a subtle botanical scent.

People occasionally ask why we add castor oil at all. If tallow can be used as a moisturizer on its own, why not simply use pure tallow?

The answer comes down to formulation, usability, and creating a balm that feels good to use every day.

Starting With the Foundation: Grass-Fed Beef Tallow

Before we talk about castor oil, it’s worth understanding what it’s working alongside.

At Resting Beef Face, every batch begins with grass-fed Alberta beef suet, which we slowly render into tallow in-house. We don’t purchase pre-rendered tallow or private label our products. Rendering our own tallow allows us to oversee the ingredient from raw suet through to the finished tallow we use in our skincare.

If you’re new to tallow skincare, start with our guide, What Is Beef Tallow?, where we explain what tallow is, where it comes from, and how we make ours.

Tallow is naturally rich and, on its own, can be used as a simple moisturizer.

So why add anything to it?

Pure Tallow Is Simple—But Formulation Matters

One of the misconceptions about simple skincare is that fewer ingredients must mean using only one ingredient.

Sometimes that’s exactly what you want. Other times, combining a small number of carefully selected ingredients creates a product that’s simply more enjoyable to use.

When we were developing our Face Balm, we weren’t trying to create the richest or most complicated balm possible. We wanted something people could comfortably incorporate into their everyday skincare routine.

That meant finding the right balance between the natural firmness of tallow and the smooth, spreadable texture we wanted from a face balm.

We wanted a balm that would:

  • glide comfortably across the skin
  • soften easily with the warmth of your fingertips
  • spread well when using only a small amount
  • remain simple and straightforward to use
  • complement the natural characteristics of tallow rather than overwhelm them

After experimenting with different formulations and ratios, we found that castor oil gave us the balance we were looking for.

What Is Castor Oil?

Castor oil is a plant-based oil pressed from the seeds of the castor plant, Ricinus communis.

Unlike many lighter cosmetic oils, castor oil has a naturally thick, viscous consistency. It’s used in a wide variety of cosmetic formulations, including balms, because of the texture and skin feel it can contribute to a finished product.

That distinctive consistency is one of the reasons it works so well in our Face Balm.

Rather than adding several different oils to change the texture of our tallow, we can use a carefully chosen amount of castor oil and keep the overall formula remarkably simple.

Why We Pair Castor Oil With Tallow

Tallow forms the foundation of our Face Balm, but rendered tallow is naturally firm—especially when temperatures are cooler.

Castor oil helps soften that firmness and creates a smoother, more spreadable finished balm.

Its naturally thick consistency also contributes glide. Instead of having to work a firm product extensively across the skin, a small amount of our Face Balm can be warmed between your fingertips and gently applied.

That’s particularly important with tallow skincare because you don’t need much.

Our goal wasn’t to make the castor oil the star of the formula. Its job is to complement the tallow and improve the overall experience of using the finished balm.

Handmade Resting Beef Face Unscented Tallow Face Balm beside fresh oils being measured in a professional skincare workshop.
Every jar starts here. Fresh ingredients, careful measuring, and small-batch craftsmanship—our Unscented Tallow Face Balm is made by hand from start to finish.

Why Not Just Use Pure Tallow?

You absolutely can use plain rendered tallow on your skin.

For us, however, creating a finished skincare product is about more than choosing a single ingredient we like. It’s also about considering how that product feels, spreads, and performs during everyday use.

Pure tallow naturally changes in firmness depending on temperature. In a cooler room, it can become quite firm. As temperatures rise, it softens.

When developing our Face Balm, we wanted to maintain the simplicity of tallow while creating a texture that was easier to scoop, warm between the fingers, and spread across the face.

Castor oil helped us achieve that without turning a simple balm into a long, complicated formulation.

We Didn’t Choose Castor Oil Because It Was Trendy

Natural skincare trends come and go.

Every year seems to bring another “must-have” oil or ingredient promising to transform your skincare routine.

That’s not how we want to formulate products at Resting Beef Face.

Instead, we ask a much simpler question:

Does this ingredient improve the product?

If the answer is yes, it earns its place.

If not, it stays out.

Castor oil wasn’t selected because it was fashionable. We chose it because, after experimenting with different formulations, it helped us achieve the texture and application experience we wanted from our Face Balm.

That philosophy guides the way we approach all of our products.

Every jar starts here. Carefully measured ingredients and small-batch craftsmanship—our Unscented Tallow Face Balm is made by hand from start to finish.

Why Not Use Other Popular Oils?

Why castor oil instead of olive oil, jojoba oil, sweet almond oil, avocado oil, or one of the many other oils commonly found in skincare?

It isn’t because those ingredients are inherently good or bad.

They’re simply different.

Every oil brings its own characteristics to a formulation. Changing the oil can change the texture, consistency, scent, spreadability, and overall feel of the finished balm.

Our goal wasn’t to create a Face Balm containing as many popular skincare oils as possible.

It was to create a balm with as few ingredients as necessary while achieving the texture and experience we wanted.

Sometimes thoughtful formulation is as much about what you leave out as what you put in.

A Formula We Continued to Refine

Something you don’t always see when looking at a finished jar of skincare is what happened before that jar existed.

Formulas rarely arrive fully developed on the first attempt.

Ours certainly didn’t.

We spent time experimenting with different ratios before arriving at the Face Balm formulation we use today.

Small adjustments made noticeable differences in how the balm spread, how it felt during application, and the overall consistency of the finished product.

Eventually, we found the balance we were looking for: tallow remains the foundation of the formula while castor oil quietly helps make the balm easier and more enjoyable to use.

Sometimes the smallest changes make the biggest difference.

The Same Philosophy Goes Into Our Lavender Face Balm

Our Lavender Face Balm starts with the same philosophy and the same tallow-and-castor-oil foundation.

The difference is the addition of a small amount of lavender essential oil for those who prefer a lightly scented option.

We intentionally keep the lavender subtle. The goal wasn’t to turn our original Face Balm into a heavily scented product, but simply to offer another option while maintaining the simplicity of the original formulation.

Whether you prefer unscented skincare or a hint of lavender, the foundation remains the same.

Resting Beef Face Lavender Tallow Face Balm in an amber glass jar displayed on a rustic wooden surface with subtle lavender sprigs, natural wood tones, and soft linen accents.

Simple Doesn’t Mean Accidental

Keeping an ingredient list short doesn’t mean throwing two ingredients together and calling it finished.

When you work with a small number of ingredients, every decision becomes more noticeable.

Changing one ingredient changes the formula.

Changing the ratio changes the formula.

Even a small adjustment can change how the finished product feels and behaves.

That’s why our approach to simple skincare isn’t about using the fewest ingredients simply for the sake of having a short label.

It’s about using what the product needs—and leaving out what it doesn’t.

Why Castor Oil Earned Its Place

At Resting Beef Face, we believe every ingredient should have a reason for being there.

Grass-fed beef tallow forms the foundation of our Face Balm.

Castor oil earns its place because it complements that tallow, helping us create the smooth, spreadable consistency and application experience we wanted without adding unnecessary complexity.

Two simple ingredients, each doing its job.

That’s the philosophy behind our Unscented Face Balm and the foundation of our Lavender Face Balm: thoughtfully chosen ingredients, carefully developed ratios, and small-batch products made by hand from start to finish.

If you’d like to try the formula for yourself, explore our Unscented Tallow Face Balm or Lavender Tallow Face Balm.

And if you’re just beginning to explore tallow skincare, our What Is Beef Tallow? guide is a great place to start.

What Is Beef Tallow?

Fresh grass-fed beef suet prepared and broken into smaller pieces before the rendering process begins.

What Is Beef Tallow?


Introduction

What is beef tallow? Beef tallow is a natural fat made by slowly rendering beef suet—the firm fat found around a cow’s kidneys. While it’s been used for generations in cooking and soap making, it’s also become a popular ingredient in handcrafted skincare.

At Resting Beef Face, we start with locally sourced grass-fed beef suet and render our own tallow before it becomes part of our Face Balms and Body Butters. In this article, we’ll explain what beef tallow is, how it’s made, and why we choose to use it.


Step 1: What Is Beef Suet?

Everything begins with beef suet—the firm fat found around a cow’s kidneys. Unlike softer fat from other areas of the animal, suet has long been prized for rendering because of its clean, firm structure.

After sourcing our beef suet locally, it’s trimmed and broken into smaller pieces to help it render evenly.

Every batch starts here.

Fresh grass-fed beef suet prepared and broken into smaller pieces before the rendering process begins.
The journey begins with locally sourced grass-fed beef suet, prepared for slow rendering into cosmetic-grade tallow.

Step 2: How Beef Tallow Is Made

Once the suet has been prepared, it’s placed into a slow cooker where gentle, consistent heat begins the rendering process.

Rendering isn’t about cooking the fat quickly. It’s about patience.

As the suet slowly warms over several hours, the pure fat gradually separates from moisture and connective tissue. This slow approach helps create a clean, stable tallow that’s ready for the next stage.

Fresh grass-fed beef suet being placed into a slow cooker before the rendering process.
Fresh beef suet is added to the slow cooker, where gentle heat slowly transforms it into rendered tallow.

Step 3: Filtering the Freshly Rendered Tallow

When rendering is complete, the tallow is still a clear golden liquid.

At this stage, it’s carefully filtered through layers of cheesecloth to remove any remaining solids.

Filtering is one of the most satisfying parts of the process. Watching the warm tallow pass through the cloth leaves behind a beautifully clean ingredient that’s ready to cool.

Freshly rendered beef tallow being filtered through cheesecloth to remove impurities before skincare formulation.
Freshly rendered tallow is carefully filtered to create a clean, cosmetic-grade ingredient ready for skincare.

Step 4: Cooling Into Tallow

Freshly rendered tallow doesn’t stay golden for long.

As it cools, it naturally transforms into the creamy, pale tallow that’s used throughout our skincare collection.

This colour change is completely natural and simply reflects the fat returning to a solid state.

What began as raw beef suet has now become clean, handcrafted tallow.

Handcrafted rendered beef tallow after cooling, showing its naturally creamy texture before being formulated into skincare products.
After cooling, freshly rendered tallow transforms from a clear golden liquid into the naturally creamy ingredient that forms the foundation of our
handcrafted skincare.

Step 5: From Tallow to Skincare

Once our tallow has cooled, it becomes the foundation of our formulations.

Our Face Balm is intentionally simple, combining handcrafted tallow with castor oil to create a rich, water-free moisturizer. Our Lavender Face Balm follows the same minimalist formula with the addition of lavender essential oil.

Our Body Butters use the same handcrafted tallow but are formulated differently. By adding ingredients such as coconut oil, we’re able to create a lighter, whipped texture that’s designed specifically for full-body hydration.

Rather than using one formula for every product, each recipe is developed with its own purpose in mind.


Why We Make Our Own Tallow

Rendering our own tallow isn’t the quickest part of making skincare, but it’s one of the most important.

By starting with locally sourced grass-fed beef suet, we’re involved in every step—from preparing the raw ingredient to filtering the finished tallow before it ever reaches one of our mixing bowls.

For us, that process reflects the values behind Resting Beef Face: simple ingredients, thoughtful craftsmanship, and knowing exactly what goes into every batch.


Final Thoughts

When people see a jar of tallow skincare, they usually see the finished product.

What they don’t always see is the work that comes before it.

Preparing the beef suet.

Waiting patiently while it renders.

Filtering it by hand.

Watching it cool into creamy tallow.

These steps are all part of the process, and they’re the reason every batch begins with care long before it reaches your bathroom shelf.

Because at Resting Beef Face, quality doesn’t start in the jar.

It starts with the ingredient.

Continue Exploring

If you’d like to learn more about tallow skincare, these articles are a great place to start: